|
Table Size |
: |
220 (W) X 170
(D) mm (8-5/8 (W) X 6-11/16 (D) in.) |
|
Table load weight |
: |
Maximum 1 Kg
(2.2 lb) |
|
Carriage cutting range |
: |
203,2 (X) x
152.4 (Y) X 31.8 (Z) mm (8 (X) x 6 (Y) X 1-1/4(Z) in.) |
|
Carriage operating speed |
: |
X and Y axes
0.1 to 1 mm/s. 1 to 15 mm/s (0,0039 to 0.59 in /.s) Z axis
0.1 to 1 mm/s. 1 to 6 mm/s(0.0039 to 0.23 in. /s) |
|
Cutting-depth control |
: |
AST (Active
Surface Tracking) System |
|
Maximum cutting depth |
: |
3D cutting
mode: 0.05 to 7 mm (0.002 to 0.27 in.)
Engraving mode : 0.05 to 1 mm (0.002 to 0.039 in.) |
|
Cuttable materials
|
: |
Composition :
Resin (acrylic , modelling wax, ABS, polycarbonate,
styrenefoam, etc.) wood and plaster. Maximum thickness 30 mm
(1-1/8 in.) |
|
Resolution |
: |
0.01 mm/step
(0.00039 in./step) |
|
Spindle motor |
: |
12 W (DC motor) |
|
Spindle rotating speed |
: |
4,000 to 15,000
rpm |
|
Cutter diameter |
: |
3.175 mm (1/8
in.) |
|
Interface |
: |
Parallel
(compliant with IEEE 1284) |
|
Power supply |
: |
AC adapter
Input AC 100 to 240 V 50/60 Hz. Output DC 19 V. 2.1 A |
|
Power consumption |
: |
Maximum
during operation : 0.6 A at 100 V. 0.27 A 240 V |
|
Operating noise level |
: |
Standby : Less
than 45 dB (A)
No-Load operation : Less than 70 dB (A) (according to ISO
7779) |
|
External dimensions |
: |
515.2 (W) X
368.3 (D) X 270.6 (H) mm (20-5/16 (W) x 14-1/2 (D) X 10-5/8
(H) in.) |
|
Machine weight |
: |
10.9 kg (24 lb) |
|
Operating environment |
: |
Temperature : 5 to 40 °C (41 to 104 °F)
Relative humidity : 35 to 80% (no condensation) |
|
USB connectivity |
: |
You can connect the EGX 20 to your computer USB port with
the optional parallel to USB conversion cable (SX - UP2) |
