Specifications
		Table size	:	610 (W) x 407 (D) mm (24 (W) x 16 (D) in) / 407 (W) x 305 (D) mm (16 (W) x 12 (D) in)
		Cutting size	:	610 (X) x 407 (Y) x 42.5 (Z) mm (24 (X) x 16 (Y) x 1-5/8 (Z) in) / 407 (X) x 305 (Y) x 42.5 (Z) mm (16 (X) x 12 (Y) x 1-5/8 (Z) in)
		Loadable workplace thickness	:	Minimum 40 mm (1-9/16 in.)
		XYZ axis motor	:	AC servo motors (DAC-FFP), 3 axis simultaneous control
		Feed rate	:	XY axis 0.5 to 100 mm/s (0.02 in /s. 0.039 to 3.9 in /s) Z axis 0.5 to 1 to 50 mm/s (0.02 in /s, 0.039 to 1.9 in /s)
		Acceleration	:	0.1 G, 0.05 G
		Software resolution	:	0.01 mm/step (0.00039 in /step)
		Mechanical resolution	:	XY axis, 0.003 mm/step (0.00012 in/step), Z axis, 0.0025 mm/step (0.000098 in /step)
		Spindle motor	:	DC brushless motor, maximum 72 W
		Spindle speed	:	8,000 to 30,000 rpm
		Tool chunk	:	Cutter holder (4.36 mm) and collet
		Positioning Accuracy	:	± 0.1% of distance travelled or ±0.1 mm (± 0.004 in) whichever is greater (no load operation)
		Repeatability	:	0.05 mm (0.002 in) or less
		Interface	:	Parallel connector (Centronics-compliant), serial connector (RS-232C-compliant), Memory card slot (Compliance with Mult Media Card), expansion connector 1, expansion connector 2
		Buffer memory	:	2 Mb (replot buffer - 1.9 Mb)
		Instruction system	:	RML-1 (mode 1, mode 2)
		Power supply	:	AC 117 V 230 V 240 V ± 10% 50/60 Hz
		Power consumption	:	3.5 A at 117 V, 1.6A at 230V, 1.6A at 240V
		Acoustic noise level	:	No load operation :75 dB (A) or less standby: 45 dB (A) or less (According to ISO 7779)
		Weight (main unit)	:	64 kg (141 lb) / 51 kg (112 lb)
		Operating environment	:	Temperature : 5 to 40 °C (41 to 104 °F) humidity: 35 to 80% (no condensation)